How to Reset Ford's Instrument Cluster

Imagine getting in your Ford car after an extended day at work only to find the indicators and meters go all over the dashboard behind the wheel. Most likely, the instrument cluster has to be reset. What is the best way to reset a Ford instrument cluster?

To reset the Ford instruments cluster, you must locate the reset switch. Press the button and then hold it while turning the ignition key but without turning on the vehicle. While it may sound kind of simple, it's not the reality. You might need to connect your vehicle to a computer program so you can program it on the computer.

Resetting the instrument cluster on the car is not easy. It will all depend on the model of the vehicle. This is the reason why this procedure is typically carried out by an expert.

If you notice flashing or unrelated indicators on the dashboard of your vehicle, the odds are you could fix it by resetting the Ford instrument cluster. But this doesn't always work. If this procedure does not work, you have to look at other options.

Find the Reset Button

The first step you must do is to find your reset button, which can be found situated on the dashboard of your vehicle. Every Ford model has its own constructed dashboard. This means that the reset button isn't in the same position on every Ford vehicle.

All cars, regardless of the manufacturer, have reset buttons located on the glass of the dashboard. It's located on the left edge of your dashboard.

This is the same for Ford cars too. The reset button should be located on the dashboard, which is on the left side. This might differ for different Ford models, but it should be near the dashboard.

If you are having difficulty finding the button, refer to the manual for your vehicle. The manual should include the exact location where the reset button is located.

Press and Hold

Once you locate the button that resets, you can proceed to the process of resetting. Begin by pressing the button, but be sure to hold it.

It is necessary to press the button and while holding it. You'll need to be holding it this time, but it's not similar to a reset button for your phone.

While you hold the reset button, insert the key from the vehicle. Then slowly switch on the ignition.

Be aware that you don't have to rev or start your car in this case. It's enough to put the key on your car into the ignition, but not completely.

Be Patient Until The Reset

As you press the button and flip the keys, you will notice that the dashboard lights on your vehicle are clearing out.

The dashboard indicators that were erratic will cease to be present. There will be signals that your device is reset.

This is the way you can tell if the reset succeeds when you notice the indicator's cluster disappearing. Then, you'll see the clock getting set to zero (or "resetting") on the display if it's an updated Ford model.

Check the Dashboard

If the reset worked, it should appear just as it was after the cluster had disappeared. There should only be indicators on the dashboard which have their spot. They could also be signals that were visible on the dashboard prior to when the cluster occurred.

If the problem is more complex, the cluster will go away; however, your dashboard will be in a state of confusion. If that occurs, it could be a problem with your device.

Test Your Car

The instrument normally shouldn't show any errors that shouldn't be. Therefore, something has led to the cluster. It could be an issue that needs to be resolved, and the restart will be enough.

Make sure your car is operating smoothly. If you detect any anomalies within the days to come, you need to take it to an expert.